Where to seal around a tap and basin
Identify the tap base, basin edge and waste fitting. Check which parts already have their own mounting gasket.
Tighten the tap under the basin before you seal. On glazed ceramic I use sanitary acetoxy silicone; on marble, granite or composite, a neutral stone silicone. A soft bead next to a long lever gets torn off.
Buying through a product link may earn us a commission at no extra cost to you.
Which fitting is leaking?
The bathroom or kitchen looks freshly sealed, and within a year the first hairline cracks appear. Not in the shower: right where the tap meets the basin or worktop. That joint is one of the most loaded in the house. A shower joint only has to follow a little movement and shed water. Here you get torsion every time you turn the lever, thermal shock (the metal heats and cools; the basin barely moves) and soap or hand-cream film that wrecks adhesion.
A mixer lever is a crowbar. Soft “universal” silicone peels off the substrate. I prefer a sanitary silicone with more body — on ceramic, OTTOSEAL S100 — because it resists that tug. The contact area is tiny: you need real adhesion at the edges, not a fat sausage of paste.
Before opening the cartridge, try the Presch silicone gun in the tightest corner. Check you can turn your wrist and release pressure at the end of the run.
When to seal — and when not
Acetoxy sanitary silicone (S100) when the tap sits on a glazed ceramic basin: it bonds well to the glaze.
Neutral stone silicone (OTTOSEAL S70) when the tap sits on marble, granite or composite. Acetoxy and migrating plasticisers stain.
Do not seal a loose tap. If it wobbles in use, the new joint splits in days. Tighten the nut under the deck first. No sealant replaces that fixing.
Do not use a silicone-free sealant on a meeting that stays wet. That wants sanitary silicone.
If water is coming from inside the fitting (seals, cartridge), extra paste around the base will not save the cupboard. Repair the tap, then seal.
If one edge is marble or natural stone, trial OTTOSEAL S70 on an offcut and check the tooling agent before touching the visible surface.
How I do it
- Check the nut under the basin or worktop is tight.
- Strip limescale, soap and the old joint completely. Fresh silicone does not bond to cured silicone.
- Degrease with a technical cleaner and let the faces dry. Household glass cleaner often leaves a film.
- Apply a thin, even bead around the base. You do not need a gutter.
- Tool with a neutral finisher and a narrow spatula. The joint should fall towards the basin, not form a cup that holds a puddle of soapy water. That puddle soaks the meeting and eventually lifts the bead.
If the tap is hard against the wall and the gun will not fit, you sometimes have to take the fitting off. Most installations do not need that.
On a new kitchen fit, I sometimes leave the base slightly nipped, gun the silicone, and fully tighten once it has skinned a little: metal and deck sandwich the bead. That is a fitting detail, not a trick for a tap that already leaks internally.
Dry-fit the FUGENFUX profiling tool. Choose the edge that meets both sides without scooping out the middle, then tool the bead before a skin forms.
If it already leaks
Stop using it so the cupboard does not fill. Cut the joint out, let the substrate dry — often a day if water has been underneath — and reseal clean. Black on the bead is usually mould from soap and moisture: replace the joint and clean; do not paint over it.
Tools and materials for this job

OTTOSEAL S100
Sanitary silicone for compatible surfaces. Check both edges before opening the cartridge.

OTTOSEAL S70
For compatible natural stone. Test colour and finish on an offcut.

Presch silicone gun
Manual cartridge gun. Check you can release pressure in the last centimetre.

FUGENFUX
Profiling tool. Dry-fit the edge that reaches both sides of the joint.
Exceptions
A tap dripping from the spout or body is not fixed by more silicone at the foot. Natural stone and composite do not take the same chemistry as a white basin. Over old residue, the new layer lets go within a few weeks.

