Seal a joint, step by step
I’m Rogier. See where I cut, which openings I leave clear and how I finish the bead with my tools.
▶ FugenfuxWhat are you working on?
Start with a video
My tools
The tools and products seen in my videos.
Preparation and removal
-
DegreaseIsoLAB degreaser
Isopropyl alcohol 99.9% · 500 ml. For degreasing compatible glass and glazed ceramic. Check the substrate, spot-test and allow to evaporate. Does not remove cured silicone or replace a specified primer.
Buy IsoLAB degreaser -
-
-
PrepCleanprimer 1101
For non-porous substrates specified in the manufacturer’s primer table.
Buy Cleanprimer -
Application and finishing
-
-
Compact alternativeFugenfux Multitool 5-in-1
Five profiles in one compact tool for finishing silicone and acrylic. An alternative to the set in the video, not the same set.
Buy Fugenfux Multitool -
FavouritePresch silicone gun
12:1 thrust ratio for low-viscosity silicone and acrylic in cartridges up to 310 ml.
Buy PRESCH -
-
Choose a sealant
-
Alternative · whiteCeys silicone
Triprotect · white 280 ml. A white sanitary alternative for compatible bathroom and kitchen joints. Check the substrate and technical sheet; not the choice for natural stone, aquariums or joints you will paint.
Buy Ceys silicone -
-
-
-
-
I may earn a commission if you buy through an affiliate link, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Shape the bead with Fugenfux
Match the bead to the grout
Cut silicone and remove the residue