Water behind a shower profile: which openings stay clear?

Shop the products for this jobShop all products →
PRESCHBuy PRESCH ↗FugenfuxBuy Fugenfux ↗

Trace the water through the frame and locate the outlets on the installation drawing before applying sealant.

Rogier · Silicrack

Water behind the shower profile: more silicone almost never fixes it
Short answer

On many screen profiles you seal only the dry side. The inner bottom edge stays open so water can run back into the shower. If water still comes out behind, strip the old joint; do not add another bead.

See tools and materials ↓

Buying through a product link may earn us a commission at no extra cost to you.

Where the frame drains

Splash finds its way in through hinges, adjustment gaps and the profile’s own seams. On many systems that inner void is a drain channel: water is meant to run back into the tray or cubicle.

Leave the water outlet in a shower profile open · Spanish audio
For this jobPresch silicone gun ↗ For laying a bead from a cartridge FUGENFUX ↗ For shaping the fresh bead
Check surface compatibility and the selected shade at the shop.

Seal the wet side at the bottom and you turn the profile into a reservoir. Water sits, picks up soap, goes black, and when it has nowhere to go it pushes out through screw holes, grout or the tile meeting. It looks like a leak “behind the profile”. You capped the drain.

People think sealing both faces is extra insurance. On a glass-screen profile it is often the opposite.

Before opening the cartridge, try the Presch silicone gun in the tightest corner. Check you can turn your wrist and release pressure at the end of the run.

When to seal — and when not to

Do seal the dry side. The vertical meeting with the tile, and the horizontal meeting with the floor or tray on the face that does not take the spray. Neutral sanitary silicone, elastic, built for standing moisture. I use OTTOSEAL S100 here.

Do not seal the inner bottom when the system is meant to drain back into the shower. That stretch is left open on purpose.

Do not add a second layer. If water still comes out, cut the old joint out fully, clean, and start again. Fresh silicone on dirty old silicone will not bond properly.

Where the detail calls for sanitary silicone on two compatible surfaces, consider OTTOSEAL S100. Porous stone needs a stone-compatible product.

How I do it

  1. Check tile and profile: clean, dry, no leftovers. Cut out all the old sealant.
  2. Degrease profile and tile with a technical cleaner and a lint-free cloth. Let the faces dry.
  3. If the adjustment gap is deep, set closed-cell PE backer rod so the sealant bonds on two faces, not three.
  4. Apply a continuous bead on the dry side, vertical and horizontal.
  5. Leave the inner bottom open if the profile drains to the tray.
  6. Tool the joint so water can run off and the flanks are filled.

Do not seal onto a still-damp substrate. Adhesion fails quickly.

Dry-fit the FUGENFUX profiling tool. Choose the edge that meets both sides without scooping out the middle, then tool the bead before a skin forms.

Mistakes I see a lot

Closing the profile all the way round “for hygiene”. Using acrylic sealant, or any random tube, in a joint that lives wet. Judging only what you can see: sometimes the water comes from a cracked tile or tanking that never reached the corner. Then the profile bead is not the repair.

Tools and materials for this job

  • OTTOSEAL S100

    Sanitary silicone for compatible surfaces. Check both edges before opening the cartridge.

  • Presch silicone gun

    Manual cartridge gun. Check you can release pressure in the last centimetre.

  • FUGENFUX

    Profiling tool. Dry-fit the edge that reaches both sides of the joint.

Exceptions

If that profile’s maker tells you to seal a stretch on the wet side, follow the system, not a generic recipe. The tile-to-tile corner is still a normal shower joint.

Silicone skins in minutes and cures from the outside in. Leave the shower unused for at least a day so the bond can take; that is common sense, not a magic timer.

More on this

Guides · Bathroom

Seal a shower screen inside or outside? →