How to choose a sealant colour

Shop the products for this jobShop all products →
S100Buy S100 ↗S70Buy S70 ↗

Hold a cured sample against both the grout and the tile. Check it in daylight before choosing white, grey or translucent.

Rogier · Silicrack

Short answer

Start with the grout colour. Compare a cured sample in daylight and under the bathroom lights. A difference in sheen can be as visible as a different shade.

See tools and materials ↓

Buying through a product link may earn us a commission at no extra cost to you.

Grey, white or translucent: compare the dry joint

In the examples below, grey follows the tile grout and pergamon softens the contrast with a pale tile. Translucent sealant lets the backing show through, so it changes between wood and stone. Compare a cured sample in daylight beside the actual surface.

Choose the application first, then the shade

For a compatible sanitary joint, check the OTTOSEAL S100 range. For natural stone, check OTTOSEAL S70. For a suitable floor joint look for OTTOSEAL S125 in the shop. Keep the profile even with Fugenfux; an oversized bead stands out even in the right colour. Check the selected shade at the retailer before buying.

Compare the sealant with the tile grout

You can spend a fortune on large tiles, a walk-in shower and decent taps, then draw a fat, bright-white bead around every meeting. The eye reads that line as a frame. Dark tile, dark grout, white silicone: the joint shouts. The room looks smaller and busier than the tiling deserved.

Change a white shower bead to grey · Spanish audio
For this jobPresch silicone gun ↗ For laying a bead from a cartridge FUGENFUX ↗ For shaping the fresh bead
Check surface compatibility and the selected shade at the shop.

Colour is not a finishing extra. It is part of the same line-work as the grout. Get it wrong and the craft disappears. Get it right and the joint almost vanishes.

Where the detail calls for sanitary silicone on two compatible surfaces, consider OTTOSEAL S100. Porous stone needs a stone-compatible product.

Match the grout, not the tile

The usual mistake is “grey tiles, therefore grey silicone”. Which grey? Tile faces have texture, glaze and lighting. Grout is the network you already accepted. If the bead matches that network, it joins the grid instead of cutting across it.

Match the bead to the grout · Spanish audio
In the videoOTTOSEAL S125 ↗ For a compatible floor joint
For this jobPresch silicone gun ↗ For laying a bead from a cartridge FUGENFUX ↗ For shaping the fresh bead
Check surface compatibility and the selected shade at the shop.
Follow irregular tiles · Spanish audio
For this jobPresch silicone gun ↗ For laying a bead from a cartridge FUGENFUX ↗ For shaping the fresh bead Smoothing spray ↗ For tooling when approved for the sealant
Check surface compatibility and the selected shade at the shop.
Match pergamon to the tiles · Spanish audio
For this jobPresch silicone gun ↗ For laying a bead from a cartridge FUGENFUX ↗ For shaping the fresh bead
Check surface compatibility and the selected shade at the shop.

I hold a colour card against the grout in the actual bathroom light — daylight and the LEDs you will live with. The same shade that looks calm at noon can go cold under cool-white spots. Names such as Manhattan, sanitary grey, silver grey, concrete grey or anthracite are not interchangeable. A miss of one step on the fan looks cheap from the doorway.

On natural stone I still match grout (or the darkest quiet tone in the stone), and I use a natural-stone silicone, not a random sanitary colour that might stain the edge.

If one edge is marble or natural stone, trial OTTOSEAL S70 on an offcut and check the tooling agent before touching the visible surface.

Gloss on matt is a plastic stripe

Standard sanitary silicone dries shiny. Plenty of current tiles, microcement and stone are matt. A glossy bead throws light back as a wet plastic strip. Matt silicone has a micro-texture that scatters light, so the joint sits closer to a cement grout.

Cleaning is similar if you use mild soap and a soft cloth. You do not need to “scrub extra because it is matt”. You do need to tool a matt bead in one clean pass — polishing it with ten strokes of the spatula can burn a patchy gloss into the surface. That is a tooling job, not a colour job; it still ruins the look.

High-gloss white tiles are the exception: a matt bead can look dusty there. Match sheen to sheen.

For a dry interior joint that will be painted, check the expected movement against the data sheet for OTTOSEAL A205. Try the finish with your actual paint.

Clear is a magnifying glass

“Just use clear — it goes with everything.” It does not. You look through the bead into the gap: cut tile edges, adhesive smears, an unfinished plaster cheek. Clear also tends to go milky or yellow with age and water. I almost never use it on a bathroom joint I want to disappear.

Use translucent brown beside wood · Spanish audio
For this jobPresch silicone gun ↗ For laying a bead from a cartridge FUGENFUX ↗ For shaping the fresh bead
Check surface compatibility and the selected shade at the shop.

If you need a colour that is not on a cheap DIY rack, a proper sanitary range has a long fan. I pick from that, on site, rather than inventing a custom mix.

Dry-fit the FUGENFUX profiling tool. Choose the edge that meets both sides without scooping out the middle, then tool the bead before a skin forms.

Tools and materials for this job

  • OTTOSEAL S100

    Sanitary silicone for compatible surfaces. Check both edges before opening the cartridge.

  • OTTOSEAL S70

    For compatible natural stone. Test colour and finish on an offcut.

  • OTTOSEAL A205

    For a dry joint that will be painted. Check movement and paint compatibility.

  • FUGENFUX

    Profiling tool. Dry-fit the edge that reaches both sides of the joint.

How I choose on the day

  1. Identify the grout colour in the room, not from a phone photo.
  2. Decide gloss or matt from the tile face and fittings, not from habit.
  3. On stone, use stone chemistry first, then colour.
  4. Tool so water can run off. A pretty colour in a soap trap still goes mouldy.

White is fine when the grout is white and the tiles are glossy. Everywhere else, white is often the loudest choice in the room.

More on this

Guides · Bathroom

Which sealant should you use in a bathroom? →

Joint colour: make it disappear, don’t make it shout