Where tile meets click vinyl in a doorway

Shop the tools from my videosShop all products →

Identify the floating floor, expansion allowance and specified trim. A threshold does not turn the gap into a joint to fill.

Rogier · Silicrack

Locate the floating floor allowance

Confirm expansion clearance and how the profile is fixed. The door must clear the profile, which must cover edges without pinning the floor. A screw through a plank can prevent the intended movement.

When an elastic joint is allowed

Use one only if the flooring system permits it at that point. Otherwise choose a transition profile for the measured heights. A sloping bead disguising the difference does not make a stable threshold.

Measure on both sides

Rest a straightedge on the higher floor and measure down at each jamb. Note the available width with the door closed. Take the measurements and flooring reference to the profile supplier. Dry-fit before fixing.

What if the door rubs on the new profile?

Check with the profile in position and open the door fully. Do not reduce expansion clearance to lower the profile.

Floors and skirtings: acrylic on top, not underneath

A gap between the skirting board and floor: should you fill it? →